Discussion Locked

Remove Old Windows Installation

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've been using the same hard-drive(s) in my last three PC's - moving them from one PC to another, and installing updated windows versions over top of previous installations. The current HD started with 98, then 98SE, then ME, then XP, now XP-PRO SP2. Each installation seems to leave old files and folders containing now useless (and/or unused) files, which clutter up my HD and which are difficult to remove because I'm not sure which files may be needed. FYI, my system reflects the software junkie that I am - and contains hundreds of programs covering many functional categories in which I work - databases, text processing, graphics, paint/draw, video and video editing, desktop publishing, not to mention assorted up-and-download, file sharing and networking programs.
The basic windows add/remove programs doesn't work anymore, nor does Norton/Symantec remove, nor does TuneUp2006. Any suggestions as to how I can remove these unnecessary programs/files to free up hd space? I've also looked at many of the directories by date, and have thought about deliting prior to a specific date- but when I have tried that I invariably get an error message that windows is using one of the files and cannot delete it.
Appreciate any assistance.
Tnx
Allen

19 replies

by pendal1

Have you considered using one of the registry repair tools such as registry first aid. This is a good tool that can scan your registry to deterime what's a valid or nvalid entry and what's still being used by windows. That's a tough one when you have so much overlapping. If things are too jumbled, you may want to back up your relevant data and format (highlevel to clear out the MBR) and start clean or install a second hard drive and slave it or slave your current drive for further protection in case a crash. That is if you don't want to erase your current drive.

by pendal1

Have you considered using one of the registry repair tools such as registry first aid. This is a good tool that can scan your registry to deterime what's a valid or nvalid entry and what's still being used by windows. That's a tough one when you have so much overlapping. If things are too jumbled, you may want to back up your relevant data and format (highlevel to clear out the MBR) and start clean or install a second hard drive and slave it or slave your current drive for further protection in case a crash. That is if you don't want to erase your current drive.

by 3xp3rt

Also you can try some utility like Norton WinDoctor, even this remove the unnecessary entries in registry, and also the unused icons, programs

by 3xp3rt

The Norton WinDoctor remove only the invalid link's and progs. This program don't remove the unused or rarely used progs

by pierrejamme

My recommendations is since this is admittedly an older hard drive, i would make it your D:\ drive as a slave. Buy a new hard drive, very cheaply these days and install XP Pro on that.
I never upgrade over an old install, always format a do a fresh install.
Peter

by nirav

Installing / Upgrading newer operating systems over older versions has its advantages and drawbacks. You retain previously installed programs and settings, but at the same time retain unnecessary files. I always prefer backing up my critical data and files and installing a fresh copy of the operating system / programs for this reason. The other option would be to install the desired operating system on a new hard drive and using the old drive as the secondary or slave (but you will have to reinstall all your programs again). I guess this does not solve your problem, but may give you another option to look at.

by ashechtm

Clarification- System already has 3HD's - original C:\ 6gb (which contains current OS), d:\ 40GB and F:\ 80GB.
C:\ is almost full, D&F are at about 75% full - I retain a large volume of historical business data and a large volume of business related images.
Difficulty with most of the suggestions is that I don't know, using a reg cleaner, which of the over 229,000 files on the system are relevant. It's still trial and error. Additionally, I use about 65% of the assorted programs that are spread and installed across the three drives. Much of the software, though older than 6 years, still provides me with benefit at no new cost so I don't want to get rid of it, or purchase newer products to reinstall them.

by hal 9000

Well if your M'Board can support bigger HDD's buy a 200 GIG drive and clone the 80 gig to that. The wipe the 80 GIG drive and clone the 40 GIG to the 80 GIG. Then wipe the 40 GIG and clone the 6 GIG to the 40 GIG.

That will give you enough space with your existing software installed even if it is a bit messy.

Of course the proper way to do things would be a clean install on wiped drives so you are effectively doing a clean install of the latest OS XP Pro in this case as a 6 GIG drive really is no where near big enough for it to run XP properly but of course you'll loose all of those little utilities that you have bordered over the years and once they are gone you'll really miss them no end.

As all you say you need is space that would be the best way of doing things and you could keep the 6 GIG drive for a DR Recovery Drive in a USB Caddy just for your data.

Col

by ashechtm

I don't want to change HD's or clone. The OS and installed software should remain as is, except for removal of old WIN OS files.
TO CLARIFY-- System already has 3HD's - original C:\ 6gb (which contains current OS), d:\ 40GB and F:\ 80GB. I retain a large volume of historical business data and a large volume of business related images.
I don't know, using a reg cleaner, which of the over 229,000 files on the system are relevant to current OS, therefore it is trial and error. Additionally, I use about 65% of the assorted programs that are spread and installed across the three drives. Much of the software, though older than 6 years, still provides me with benefit at no new cost so I don't want to get rid of it, or purchase newer products to reinstall them.

by hal 9000

Well the only real thing you can do is to remove any backup system files that where created on the C Drive when you installed the updates of the old system files. Currently there are no Registry cleaners or other programs capable of doing what it is you wish to achieve.

But since you are relying on such an old HDD as a Boot Drive which as you say is out of space I hope you have a good recent Backup of all your data and utilities as HDD's do fail and when they die they are tremulously expensive to recover the data off. The last one that I had to send away for Data Recovery only cost $15K AU and it was only 6 months old if that.

As you are storing images you should also know that if you burn them to a CD/DVD they have a limited life expediency [b]Kodak claims a max of 3 years[/b] so they should be burnt on a regular basis so you do not start to loose image quality and only use high end one use disc's to perform this operation on. Even tape has the same problems and the only way that I've
seen long term storage of this type of material is on HDD's that are not actually fitted to computers but locked away in a safe even then though they are rewritten to at least once a year. But I must point out that that is at a High End Professional Image storage place.

Col

by hereinoz

I tend to agree, Col. I think he is looking for a magic bullett that only exists in the world of fantasy.

Alan

by rb_techrepublic

Why the hell doesn't someone write the magic bullet and make some money. I used to be a tech programmer, but these days I run a business, and I just want a tool to clean up the crap quickly.

no way I want to stuff around changing disks etc, which all takes time. Just something to clean up the crap, quickly and easily.

by toad464

Turefully I'd coppy all needed data to a DVD Disk and format all drives with a program designed to make any old data impossible to read then I'd slowly put all your old programs back on when all programs and data are fully put back I'd make a Startup DVD Disk so that anytime you want to cancel and start again all you need is your startup DVD or DVD's and a backup of data created sence and you don't need to install everthing over and over again but you will have to stat new to begin with there is no real way out of this as a person previous said to you they don't make software for that as yet and have a data base of all new files created from new start so that you can do a quick data backup and new install as often as you like hope I worded this for your understanding its hard to put in a short way but I more than think you'll get the point.

Thomas the Toad

This discussion is closed to new replies.