Discussion Locked

Replacing NETWARE compliant

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have inherited a network configuration where a Windows 95 station needs to communicate with a Netware 3.76 server.
Two NICs are present on the Windows 95 station; one is NETWARE 2000 compliant the other isn't but has the IPX/SPX protocol bound toit. As the two cards are connected to the same physical network I need to disconnect one of them (loops are no-no on Ethernet). If I choose to disconnect the NETWARE 2000 compliant card will the non compliant NIC with IPX/SPX installed ensure all communications with the Netware 3.76 server.

If this is a viable solution what pitfalls do I have to look out for?
If a better solution exists can anyone suggest to me what it is?

Thank you

3 replies

by jimbb

First of all, you don't have a "3.76" server. Type "Version" on the system console to see the real version. I guess you're looking at the version of Monitor, and I guess you really have a NetWare 3.10 or 3.20 server. That thing needs IPX to communicate, so it's a good thing to check indeed if IPX is bound to your NIC.

Second, you don't have a NETWARE2000 adapter, but NE2000 (or compatible), that is a type of adapter that has nothing really to do with Novell NetWare. So you are not obliged at all to use that one.

Then what do you need? "a" network card, the IPX protocol, and a client. It probably won't be needed for this case, but I just give it for the future: if you install a network adapter and let Windows (any version) auto-install a protocol and a client, and then install a new NetWare client version (free downloadable from support.novell.com) you'll see that one option is to use IP or IPX or both, and it will install the appropriate IPX version for you, correctly bound to the adapter you have.

Jim

This discussion is closed to new replies.