Discussion Locked

Replacing Server Drive.

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are running Novell Netware 5.1 on the server. We want to replace the drive with a larger drive. How can we do that and keep everything identical to what it is now. The last time we got someone to do something like this they just started from scratch, we hope we don't have to do that.

5 replies

by timthetoolman

You can use a utility like Norton Ghost to backup the entire disk and restore it to a larger disk.

This will replace the disk EXACTLY as it was when it was backed up (except having more free space, obviously...)

If you install both disks in the machine at the same time, you'll be able to use the direct "disk to disk" method which wont require pesky intermediate storage.

Hope this helps,
Cheers,
Tim.

by brent t

Ghost is great for cloning PC drives, not so crazy about using it on my server however, by checking the drive using FDISK you will note that Ghost sticks a Non DOS partition on the drive in the very begining of the drive, not sure how Netware would like that, may be just fine but I would be careful. Here is how I would handle this...

I would setup a mirror set using the new drive, after the mirror is complete, install it as the primary then I would use a third party util like server magic to resize the partition (streching the partition could also work) on the new drive taking advantage of the additional space.

Good Luck

This discussion is closed to new replies.