Windows Forum

Ask something
Discussion Locked

Replication

0 helpful
5 replies

by g_scheepers 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi All,

I've been battleing to get the PDC to send a message out that it/domain controllers has replicated. It has always done it in the past but for some reason it's not doing it anymore. I've checked every I could think of such as replicationsetup to/from bdc's/pdc, System event notification, etc. which have all started and are running. Any ideas which I could try to resolve this? I could really do with a solution to this.

5 replies

by jeffp

My only thought that I could come up with is to check the messaging service, and make sure it is still running. If it is then stop it and start it again and see if this fixes your problem. If not I would just re-setup your replication settings andsee if that clears up the problem. Also check the alerter service for startup settings and to see if it is running also. You can also reference these articles in the MS KnowlegeBase (Q101602 and Q104204).

Jeff P
MCSE 2K

by estebandelatorre

Hi,
Check first if the replication built-in schema is working for example between a PDC and a BDC, by promoting a BDC to pdc and vice versa.
Watch in the eventlog for any anomalies, and check that the cahnge has finished.
The replication scheme,once this working, should not have more problems.
Both machines with same level of SP, dosuble check the correct path definition under the export/import directory.
The first time, do it as the default show by NT, don't change any path. Put a file and see what happens.
If nothing happens in a couple of minutes, check the event log for any new posted.
Also check the value of the replicator governor (set it to 2)

This discussion is closed to new replies.