5 replies
by sgt_shultz
you are saying you had xp on here before with no errors? why did you start over?
check the event logs to see if any Errors
flash the bios to the latest greatest. check for new motherboard drivers for xp sp2
turn off the performance option to 'restart on system error'. then on shutdown i predict you get, instead of a restart, a blue screen error which we can help you look up.
if this used to work, have you considered trying 'press spacebar for last known good configurtion'
what was the last driver you put on. printer?
by tben
by hal 9000
When you applied the patches etc to the newly loaded system did you have an AV program installed?
If not you have most likely got an infection from the MS update site and this depending on what it is could be causing the problem. Also if you have installed Windows without SP2 and then installed SP2 you could very well have got a bad install of SP2 which is not unknown to happen particularly if you are overclocking the system. If that is the case there is only one solution Wipe the HDD with a wiping utility that writes 0 to every sector and reload the entire system.
This time before you log onto the Internet load an AV product and have it fully updated before going anywhere near the MS Live Update Web Site it's far safer to do it that way than run the risk of infection which I've seen on numerous occasions now and always when I'm in a hurry to get something done.
It's really faster to do the job properly and first load the OS and then the drivers for the hardware then an AV program and update it totally before you go anywhere else on the net.
Col
by tryten
by luke.jones
Go into the device manager of the computer and reinstall the driver for ACPI Power Button to the generic windows driver.
This should solve your problem.
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending