This applies to all HP servers.
1. This assumes HP server is functional. Restore the latest backup. Install Service Pack 4 if you have not done yet. Replace the current IDE driver to the Standard PCI IDE controller. Remove all current chipset devices and PCI/ISA drivers. Ghost the HD to the new HD in Dell or IBM. Let the new Server find drivers. Install motherboard and other necessary drivers. All your Service Pack, MS hotfixes, and critical updates should be intact. In general, if the two computers (HP and Dell/IBM) have the same HAL, the transition is smooth but it is not a requirement.
2. If this fails, it was most likely caused by mismatched HAL. You need MS Windows 2000 CD, not Recovery/Restore CD. Reinstall Windows (in-place upgrade or repair installation) over the current failed one. The reinstallation will install new HAL and other drivers that Windows finds in Dell/IBM. Install motherboard and other necessary drivers. If the Windows CD did not have the latest Service Pack, you have to install it. You also have to install all MS hotfixes and updates. Reinstallation does change some features. Please refer to the reference below.
You have to be careful when you ghost a HD. You may have to run ?fdisk /mbr? if the Dell/IBM server does not boot. Please add a comment if you need more information or help on this one.
References:
? http://tinyurl.com/j9u7 ?How To Replace the Motherboard on a Computer That Is Running Windows 2000 or Windows Server 2003?
? http://tinyurl.com/3kufo ?How to perform a disaster recovery restoration of Active Directory on a computer with a different hardware configuration?
? http://tinyurl.com/6lpo8 ?What an in-place Windows 2000 upgrade changes and what it does not change?
? http://tinyurl.com/5voze ? How to move a Windows 2000 installation to different hardware?