Question Locked

Router connected to 802.1x network doesn't assign IPs to some devices

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Using a switch and MAC duping i managed to connect my router (TL-WR4841N v9) to the 802.1x network in my dorms.
After a factory reset to the router, all devices could connect to the router (without any internet connection obviously). I set up a static IP (laptop's IP when it was connected to the 802.1x network) and the same MAC address as the laptop's ethernet network card. The laptop authenticates to the network and can be removed from the switch because the router takes over the connection. At this point all laptops are able to connect to the router and have a stable connection. But none of the phones i have tried are able to connect to the router. As far as i am concerned, they are not able to have an IP assigned by the router. To my knowledge there shouldn't be any difference between a phone and a laptop but maybe i am missing something...

1 reply

by rproffitt edited

You have to use the methods provided to you by your network admin.

Sometimes they don't allow routers and such but it's their network, their rules and also, "how to do this."

This discussion is closed to new replies.