Discussion Locked

Router too slow initialising

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an Alcatel router and after turning on, it takes about 20 mins before my client systems are able to surf. Is this caused by the VCI and VPI values which does not sync. with the ATM Virtual Channels?
Current : VPI - 8
VCI - 35

ISP supports : VPI - 0
VCI - 100

3 replies

by serged

This is really just an observation. If you are using distance vectoring as your RIP then it will take time for all other routers on the network to update their respective tables once the alcatel router is switched on. This is called the 'convergencetime' and apparently this can take a long time on a large network. However if you are using 'link state' as your RIP then this in theory should have a convergence time of close to nothing. Find out how many routers are on your network and then you should be able to calculate how long the convergence time should be (if you are using distance vectoring). I do not expect any points for this, since like I said it is not an answer.

This discussion is closed to new replies.