Networks

Ask something
Discussion Locked

Routing in Netware 5.X

0 helpful
3 replies

by jf555 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
What is the correct procedure to do routing within a Netware 5.X server? For example, I need to redirect all traffic coming into 192.168.113.0/24 to 192.168.110.1, Thanks

3 replies

by pgm554

1.In INETCFG, Protocols, TCP/IP.
2. TCP/IP protocol configuration
3. LAN Static routing,configure to enabled.
4. LAN static routing table.
5. "Enter" to bring up the static routing table screen.
6. "Insert"
7. Static Route configuration .
8.The default route type shows as network
9."Enter" to be able to select default route.
10.Enter the IP address of the d for the next hop.
11.Press ESC to save the changes
12.Either bounce the server or do a reinit.

This discussion is closed to new replies.