Discussion Locked

Routing & Remote Access in Windows2000

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all,

Scenario: need to configure W2k Server to act as NAT Router to connect public (cable internet access)to private lan.

What is Known:
1)need two nic cards installed in W2k Server(1 connected to private LAN& 1 connected to public internet WAN)

2)WAN interface is configured with static IP, Subnet Mask and Def. Gateway issue by ISP

3)LAN interface is configured with generic Internic IP: 192.168.0.1 255.255.255.0 with no Default gateway entered per Instructions.

4)DHCP Client/Server services are started
5)DNS Client/Server services are started
6)ICS Service is Started

7)Routing & Remote Access is enabled and both public (wan) and private (lan) interfaces have been configured as such:

WAN int: set as public withTCP/UDP Translation. IP info staticly set with Info
provided by ISP.

LAN int: IP=192.168.0.1 mask=255.255.255.0 def gateway=0.0.0.0

8)All LAN clients are configured to use DHCP.
with scope IP start=192.168.0.2 mask 255.255.255.0 End IP=192.168.0.255

Those are the Facts! Here's my problem:

None of my LAN clients receive IP via DHCP. None of my LAN clients can access the internet.

5 replies

by mwalden

I'm in much the same situation. With a couple differences: 1) The router which allows connection to the Internet is also a DHCP server which assigns private IP's in the range 10.0.0.2 through 10.0.0.255. So in opther words not only must the Win2k server machine be a dhcp client, but also a server (for the private lan). To make the situation worse, the actual OUTSIDE IP of my router is dynamic.

I could really use some help on this one.

by ghickman

I am also trying the same thing and can't get IP packets passed. I want to use NetMeeting and it won't go through my router with NAT from my ISP.....but I only have five public IP's and twenty computers.

If someone can figure it out...go for it. I saw the article on TechRepublic https://www.techrepublic.com/article.jhtml?src=search&id=r00320000906det01.htm and hope it helps. The qwest continues. I never thought I'd want to know so much about subnets and DHCP in my life.....

by Member 21184048

It's a fact that you have two problems here, please tell me more on how you have your DHCP setup. After your DHCP is up and running properly, so that your client can talk to the server, then your client may be able to get to the internet. Let me know what scope options that you have made for your subnet...

by eyeonit

I am having the same problem. I have 2 Nic's, running Win2000 Server. My WAN connection has to be dynamic. I have been working on this problem for several days now. I have the DHCP running correctly-each node on the network can see and access the server. I am thinking is has something to do with the DHCP. I am stuck. I think I have tried just about everything. I bet it's something really simple though. I hope one of us figures this out. I am glad I'm not the only one.

This discussion is closed to new replies.