Discussion Locked

Running PERL and Netware NES

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My client is running NW4.11 with approximately 125 users. I have installed TCP/IP, NES, Perl and all seemed to be successful. I am currently having problems configuring Netware/IP and DNS/DSS.

I am wanting to create a VERY BASIC INTRANET...mostly static HTML pages with PERL and a little javascript. The HTML will mainly be edited by key users.

As I am having trouble configuring Netware/IP and DNS/DSS (haven't even gotten to the client-side of things yet), I decided to take a frustration break and ask this question:

*Is configuring Netware/IP, TCP/IP, DNS etc. etc. even NECESSARY if all I want to do is run PERL?*

My client will never turn this into an internet gateway (because of security reasons). They just want an area where they can disseminate info in a timely manner. And PERL is neccessary for dynamic calendaring, bulletin boards, etc.

All I want to do is to run PERL...not change my whole system configuration. Is there anyway around it?

Thanks!

Liane Harrold - Muncie, Indiana

15 replies

by gregc

My Question is why do you want to use Netware/IP???? Why not let the client machines have both IPX/SPX and IP Stacks on them??? IPx/SPX for file and Print and TCP/IP for accessing the webserver on the Novell Server. You could also set up the Novell server to be the DNS server if you want it to be, if not use a host file. Plus you could set up the Novell server to be a DHCP server and eliminate the Addressing nightmares. Which Webserver software are you using on the Novell Server????
Posta little more info and I think we can help you out!!!! Email me at greg_conroy@yahoo.com with more info.

Greg in Atlanta

by aaron v

Where are you attempting to load the WebServer? If you are running it on NT/2000, Win98, or Unix, you will most likely not require IP on the NetWare system, if your clients have the IPX protocol loaded. Since you are using Perl, I would use an NT workstation with Peer Web Services (and Active State Perl) or NT/2000 Server with IIS, or a Linux/BSD box with Apache.

A Linux/*BSD (FreeBSD, OpenBSD, NetBSD) Apache server will run on older hardware. Perl, the OS, and Apache are all free. I have often seen Linux/*BSD used on 486's or Pentiums to run websites.

by mstrankay

All you really need to do is configure the TCP/IP protocol on your NetWare server and then install the Novonyx (Novell/Netscape) Suitespot or Enterprise web server which can be downloaded from Novell. By default the web server installs to the SYS:novonyx\suitespot directory and a DOCS directory is created below that for your static home pages etc. There are several example files for various scripts including PERL scripts in the default setup. You can find documentation for PERL 5 on the Novell developer site at http://developer.novell.com (search for perl) or at http://developer.novell.com/ndk/doc/docui/index.htm#../perl5/perl5enu/data/a1z6h48.htm which is where the search takes you.
You don't really need NetWare/IP or DNS/DHCP to use PERL on the server, although without a DNS server somewhere you will have to use the actual IP address for your server rather than its' name.

by rmacbeth

If you upgrade to NW 5 or 5.1 IP and WebServer and PERL support comes included. Netware 5.x is build for TCP/IP and you will not have to use (or want to use NWIP). It is very easy to upgrade and DNS and DHCP is build into NDS and it is a snap to set up. Yyou will see many wonderful benifits in doing so.
Rich Macbeth CNI/CNE

by gicu artistu'

For everything that runs HTTP (Web server) you need TCP/IP because HTTP is based on TCP/IP. The best way is to set a DHCP server with private adresses (10.1.1....) and everything should work fine.
If you want more then one Web Server on your intranet then you need a name service (DNS) because DHCP is dynamic and you don't want your people to ask what ip address you have today? everyday but if you don't you can install your netscape server (NES) on that Novell server and ask people to point their browser to that address.
NES is kind of awkward to setup but if you are patient enough and try to understand their help your home free.

Luck.

by sstalib

Lets cut the chase and be direct to the point. To run PERL i.e. cgi scripts you dont necessarily need NW/IP, TCP/IP, DNS, Web Server ETC. Check out http://www.perl.org

However, you will need a web server to handle your html. And a web server has certain requirements which you need to provide. The most basic requirement is that the TCP/IP protocol be installed and the web server have an IP address which the users can use to contact it.

by rws

Hi Liane,

If all you are trying to do is set up a web server on the file server, you do NOT need to use NetWare/IP. All you have to do is setup an IP stack on the server (install NIAS 4.1 from ROM #2 and use INETCFTG) If you need a DHCP server on the network, then use the simple one that comes with NW 4.11. You configure it with DHCPCONF (if I remember right) But be aware that once you install the DHCP server, it doesn't always get included in your AUTOEXEC.NCF. Check for LOAD DHCPSRVR
As to the actual web server, your best bet would be to download and install the latest and greatest Novell/Netscape web server. It's stable and runs well and all configuration is done through a web browser (use Netscape).

DNS is another matter. If you want your users to be able to simply type in the name of the web server, then you need a method of resolving DNS. You can install the DNS server that comes with NW 4.11, but it can be a pain to configure. If your network is relatively small, you might just wa

This discussion is closed to new replies.