Discussion Locked

Safe internet connection

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have two computers. i installed winxp one of them and the other i installed win98. i have an Adsl modem connection on winxp.

i set a network between two computers and share the internet connection.

actually i use Zone alarm for safe internet connection and control the programs that uses internet. but when i start the zonealarm the second computer can't connect internet. i try to change all settings for local zone but i can not solve this problem.

first: is this a better way for safe connection and control the programs that uses internet connection.
second: is there any program like zonealarm,where can i download and register it.
third: how can i enable to use internet in both machines.

3 replies

by cg it

well the dirty and nasty way is to multihome the XP machine e.g. 2 NICs. 1 is your public NIC which gets its IP and DNS addresses from your ISP, the other is your private NIC and you set static IP address for it. Connect the private nic to a hub and connect your W9X computer to the hub. Set the W9X hub with a static IP address in the same range as the private NIC and the default gateway is the public NIC IP address, DNS is your ISP DNS. run the ICS wizard on the XP machine and away you go!!

Easy way is go invest in a consumer levelCable/DSL router. Follow the easy to read directions and poof!!! your in!!!

by nic_g

try using a proxy program instead of the built in windows one, such as www.analogx.com. Install this on the winxp machine.

Change the ip's on the machines and put them in the same subnet, something like 192.168.1.1 and 192.168.1.2 and have 255.255.255.0 as your subnet masks, to do this you need to right click on the network connection and no to properties, then click tcp/ip and properties. Make sure that both machines are in the same workgroup, just be on the safe side, my computer, right click, properties.

on your 2nd machine go into IE, tools, internet options, connections, LAN settings, and setup the proxy server using the ip of the xp machine and the port from the readme file suppliyed with the proxy.

let me know if u want any of this clarifying

hope this helps

by glyall

first is your adsl moden usb. good luck

second if your adsl modem is ethernet ( using cat 5 cable) buy small hub or switch.

I have a siemens speedstream ss2604, which have a printer port on it. I can connect 4 PCs/Laptops to it share the same printer. I have two PCs with XP and one with win98 and have no problems connecting to the internet or printing.

seimens have other hubs, switches, routers the can and will help your problem.
there are others manufactor to that make one like my ss2604

I think you might be happier to try something like this

Good Luck

This discussion is closed to new replies.