Discussion Locked

Sasser on unformatted hard drive

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
A customer brought his computer to me that had been running Windows XP Pro. He had Sasser, and thought Fdisk'ing would solve the problem. Now the HDD is unformatted, and I can't get it to boot either from MS's setup floppies or the CD-ROM. As usual, it reboots continually. How do I manage to get into this drive to get rid of Sasser? Is there a DOS Sasser fix?

7 replies

by Member 32254067

from what i read about sasser it would reboot but you would have to be on a network or internet. What you would have to do is take it off any network and isolate the machine to repair it. Norton has a boot disk you can create with the latest signature but i am not 100 percent sure if that will fix your issue. I will give you a link so you can read about the sasser and see if you are getting any symtoms and what you can do about it .

http://securityresponse.symantec.com/avcenter/venc/data/w32.sasser.worm.html

http://www.microsoft.com/downloads/details.aspx?FamilyID=76c6de7e-1b6b-4fc3-90d4-9fa42d14cc17&displaylang=en

hope this helps. :)

by mmuggins11

Thanks for the links! I'll look them up. Trouble is, it won't boot from floppy, cdrom or hdd. With boot floppy in, it just grinds and grinds. I hooked up a new FDD but same result. So I have no idea what I can do now. I tried the sites, but comes back that it can't find the pages. Thanks anyway!

by Member 32254067

funny thou, the links work. If your machine does not even boot into a floppy you have more than just virus issues going on. Can you even get into the bios?

by shantie

Just a thought, can you hook up this hard drive in another computer as a slave drive, make sure it is recognised in Bios, boot with floppy to A, then try formatting slave drive. I have had to do this a few times.

by mmuggins11

Conchitta, Thanks for the tip - duhhhhh. I knew this - but didn't think to do it. Thanks! Will try it out. Congrats!

This discussion is closed to new replies.