9 replies
by djmorrissey
by computab
You need WinRAR from http://www.rarlab.com/download.htm
to open your RAR file to extract the driver files then use Device Manager or Add Hardware control panel to install drivers.
by computab
by hal 9000
The driver should have been on a floppy that came with the M'Board labelled RAID. That has the SATA Drivers on it and will allow you to install from there after loading the SATA Drivers.
If you have lost the Floppy the driver is here
Under the RAID option all you need do is download the correct OS version and copy these files to the Root of a Floppy and you can install the OS onto the SATA drive.
If all you want to do is use the SATA drive in conjunction with the IDE Drive you should just need to Add New Hardware and then use this driver to get a working recognised SATA drive.
You can't at this point in time Ghost the IDE to SATA Drive as the SATA driver will not be present on the SATA drive and it will be impossible to boot from.
Col
by computab
by pleclaire
by computab
by computab
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending