Discussion Locked

Screen Volumne Considerations

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

In our High Tech world of used equipment and partted together equipment as well as brand new equipment I've run into a situation that is noval to me: It turns out that a local has a 'slow' operating on on of its wares, it is partted together too, turns out it is written for a certain size screen. Now I'm not sure what the minimum size is but I am sure that the width and heigth of the screen are okay, turns out the depth of the screen is, has to be, the problem. It, the screen, is one of the newwer shallow depth screens and thus it may not be able to run it at any sort of appreciable speed. On an old nineteen inch CRT it works great and the thing it was chopped out of is for a nineteen inch monitor; CRT?!

To solve I got the local systems person to retire several things to a less volumne occupying state outy of the way and it works somewhat faster, but still not as fast as in the nineteen inch CRT, and no it does not seem to have been written for CRT alone.

1 reply

by ozi eagle

You are right on.
The volume of a 19" CRT (approx. 4590 cubic inches)is much greater than for the same size TFT or LCD monitor (approx 448 cubic inches).
It is only logical that the older CRT monitor can hold more, because of its greater volume, about 10 times more.

However, there is a fix for this problem - a wastepaper basket placed hard against the back of the newer type monitors. This increases the volume dramatically, to about that of the older CRT monitors, and improves performance.
Be careful, you must use a metal one, instead of plastic, so that radiations can't get out and cause loss of useful data from the picture.

This discussion is closed to new replies.