1 reply
by rproffitt Accepted solution
But you should check the router manual to see if it supports this configuration.
1, The second router address IMO should NOT be x.x.1.1 but out there say at 200 to avoid issues with the first router's DHCP pool.
2. The second router setup seems to be one where you one ONE LAN. If so set the IP as noted in step 1, then disable the second router's DHCP server/service.
3. Finally the hardwire connection would be from an Ethernet LAN port of the first router to a LAN PORT of the second router.
But after all this I see the Digicom is NOT A ROUTER but some DSL-MODEM+ROUTER which is not something I expect to function as an externder.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending