Question Locked

Sending Multicast over multiple vlans

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Cisco 4507 with multiple vlans configured. I have a video encoder that sends multicast packets. The video encoder is on vlan 10. All clients on vlan 10 can receive the broadcast. Clients on other vlans can connect to the device but they do not receive the broadcast stream.

I have IP multicast-routing enabled.

Each vlan has IP PIM Sparse-Mode configured.

Each vlan has IP CPMG configured.

What am I missing?

3 replies

by dwalker

Thank you rob_dev you pointed me in the correct location. I need to create a RP on my 4507. I created a loopback interface and set that as the RP. The multicast traffic now routes across vlans.

This discussion is closed to new replies.