9 replies
by bigcheif
by dcrook8770
Sorry for the late reply.
It turns out that the problem was the NIC driver provided by Micro$oft. Even when searching for the latest version downloaded driver, W2k will "suggest" the driver provided by M$. You have to "Select" the 3rd party driver (3com, Intel, ect)
by prompt
Hi!
The first thing that I would check is the media type in device manager for your network card.
For example 100BaseTX_FullDuplex should work fine with a switch with same settings.
When set to auto it will likely be decreased speed
//ola
by dcrook8770
Sorry for the late reply.
It turns out that the problem was the NIC driver provided by Micro$oft. Even when searching for a newly downloaded driver, W2k will "suggest" the driver provided by M$. You have to "Select" the 3rd party driver (3com, Intel, ect)
by rogerndgreen
A while ago, there were a lot of postings in various newsgroups all relating to poor/variable performance of 3Com 3C905's, some of which I have also seem myself.
I agree with the other two suggestions. First of all, lock down your card & switch ports to use the same settings (speed, HD/FD), make sure that your client is set to use the required frame types (don't rely on the Auto setting)and if it don't work, try a different NIOC.
Intel's current ones are quite nice!
HTH
Roger
by dcrook8770
Roger, U get the points.
Sorry for the late reply.
It turns out that the problem was the NIC driver provided by Micro$oft. Even when searching for a newly downloaded driver, W2k will "suggest" the driver provided by M$. You have to "Select" the 3rd party driver (3com, Intel, ect). I just loath the way "lord" Gates minions think they are the greatest. With all the bugs I still see in W2k, I wonder why I havn't went to linux or something else just to prove a point. Unfortunatly, my parent company is about to make me convert entire network to M$ and Hexchange sever and the works just to conform.
You know the old story, If your friend jumped off a cliff, would you jump too.... (sigh)
by colin_joseph
by dcrook8770
Sorry for the late reply.
It turns out that the problem was the NIC driver provided by Micro$oft. Even when searching for a newly downloaded driver, W2k will "suggest" the driver provided by M$. You have to "Select" the 3rd party driver (3com, Intel, ect)
by dcrook8770
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending