Question Locked

Server Lifecycle

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to develop a strategic plan for the replacement of our hardware. We are a very small business with approximately 20 staff. We have one server used primarly for file and print services, laptops (with docking stations), a few desktops and a handful of printers. I'm most interested in the lifecycle and replacement strategy of the server. When is the right time to replace it?

6 replies

by langlier

is "as needed". If you have a growing company you may need to suppliment it but for only 20 people if the server is running well and its components are not in danger of failing or needing replacement anytime soon you may want to talk to management and develop an expansion plan (if the business is going to expand). From there you'll want to determine backups and possibly RAID depending on the need for data security. You'll always want extra Hard drive on hand for that data security. And figure out when you may need more storage/power in the future based on your companies development.

by dmz13

The company has no immediate expansion needs (we just increased the server hard drive capacity). We also have a backup strategy implemented and the drives are in a RAID 5 configuration. How do we know if the server "components are not in danger of failing or needing replacement anytime soon"?

by langlier

With a RAID 5 its always best to have 2 HDs sitting around in case they are needed. Keeping a few hardware diagnostics and running them on a scheduled basis to make sure the hardware is in check. after the hardware reaches 3-4 years in age its time to start thinking about upgrading/replacing. Sooner if a component fails.

by naughtymonkey

That is what I implemented for my company with 30 employees. If there is a need to upgrade befor then due to hardware requirements then that can be done as well. We do have a lot of equipment for a small company though (22 Servers and 79 workstations) just becasue we are developing software and need differnet platforms, QA, and development machines.

by cyberhic

It really comes down to either you can't get support on the hardware, or the hardware is no longer performing well enough to meet the needs of the business. In the support arena you have to decide what you will do if there is a failure. With a small shop like yours it???s going to be a critical event and the impact is dramatic. After that is performance based. If the performance of your hardware either impacts the business users or is impeding the business process then it???s time to upgrade

This discussion is closed to new replies.