Discussion Locked

Service pack questions

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I copied the patch exe from a cd mounted volume to the root of the sys volume. I downd the server went to th nwserver directory and typed the name of the executable. It extracted to a subdirectory under the nwserver directory. I restarted the server and loaded nwconfig. Product other and set path to sys:. Error message cannot find netmain.ils or path incorrect. Went to console one and did not see directory under sys: volume. In Nwconfig can I set path to c:\nwserver\subdirectory?

12 replies

by volovoy

You didn't mention version of NetWare & Service pack. Possibly, executable file must be extracted in a root-level directory on a NetWare volume that accepts lon paths. Try to find on you CD file readme.txt or something like this or go to Novell web site and find how to install this service pack.

Good luck
Alex

by wcraigmiles

The best way to patch the server is to read the readme file. Almost all of the newer patches need to be installed from the netware volume. I usually standardize my patching procedures and create a directory under server called patch or patches. In that directory I extract the file. Then you can point nwconfig to sys:system\server\patch\xxx and the install commences.

The newer patches will actually patch the files on the dos side. Be sure to not have the secure console or remove dos commands active when you do a patch. Very bad things can happen.

by jimbb

The easiest way to expand a service pack is to put it in its own directory in the root of a volume. Expanding SP2A for NW51 for example in the root of SYS: will create SYS:\NW51SP2A for you, and that is the path you should give.
You expanded the service pack in the C:-drive, so of course you won't see it in SYS:, it's simply another partition.
But you can use any path in NWCONFIG, when installing a product (Service Pack or whatever). When it asks for the path, hit the F3, and fill in wherever you put the Service Pack, like C:\NWSERVER\PATCH, for example.
One word of warning: recent service packs have sometimes a pretty deep directory path, and if the directory in which you expanded the file has a long name as well, the combination maybe too long. So in the future, preferably expand a service pack in the root of a volume, and then choose VOL:Directory as a path in NWCONFIG.

Jim

by estebandelatorre

Follow this steps:
1.- Make a sub dir under sys: volume
2.- Copy Here the patch.exe file, unpack it
3.- Read carefully thr readme.txt on how to install that particular sp.
4.- If nw4.1x load install and select install a product not listed, change path to where the patch is installed and install it!(netware can have access to DOS partition if it need to upgrade it!)

by raymond wong

Mount the CD.
Login to the server from a client.
Map a drive to the CD volume.
Execute the file under f:\ (sys:\).
Install the patch under NWConfig.

This discussion is closed to new replies.