Question Locked

Service Tech

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am using SBS, having 2 NIC, SBS is working as DNS, DHCP server. thru NIC1 I am connected to internet, NIC2 is responsible to give IP address to my internal network, which I am getting. But Internal network workstations can't connect to Internet. they can ping server and other workstartions. My setup is :

Modem->Router-> NIC1 having IP address as follows:-
192.168.16.2
255.255.255.0
192.168.16.1 gateway
192.168.16.3 P.DNS Server

Second NIC is my DNS, settins are as follows:
192.168.16.3
255.255.255.0
No gateway
192.168.16.3 P.DNS

I checked the DNS server properties, Interfaces, Forwarder and root hints are all ok, But I am not able to connect to the internet thru companies workstations. but they can ping DNS server i.e 192.168.16.3 thru they are connected.

Any suggestions for me please. And thanks in adavnce...

4 replies

by cg it

run the Connect to the Internet wizard from the Things to Do list in the server management console.

This will configure SBS for connecting to the Internet.

by doktorgphd

hi there, I'm having the exact same problem. Did you ever get it to work?

Thanks

Gabriel

by rgrover72

Yes, It worked for me. How ....

1. Look for Todolist.exe file on server.
2. Run todolist.exe
3. Click on connect to internet option.
4. click next
5. connection type : broadband (next)
6. Broadband uses : A local router device with IP address. (next)
7. Router connection : Check DNS server addresses from your ISP (next)
8. Window will prompt for firewall settings click 'yes'(next)
9. Network Connection
a) ISP network connection : Internet ->choose Local static IP address of server i.e NIC IP address which is connected to internet.
b) Local network connection is : 2nd NIC IP address, which is connected to Intranet thru Switch /router.

10. click next, next, next, next, next, next (6 times) then enter your domain name.

11. next , finish.

NOTE : RESTART YOUR SERVER WHEN ITS ALL DONE.

It worked for me. In case it didn't work for you, try to change the DNS IP adress (Second NIC card IP address)

This discussion is closed to new replies.