Discussion Locked

Setting up a small network

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

What kind of a network would I install for:
small buget community centre, annual operating budget 2.2 million per year.
1 building 3 floors 50,000 sq ft each, square building
floor 1 - fitness centre, reception, sales, program and marketing staff
floor 2 - meeting rooms and child care centre, administrative and management staff, fundrasising staff
floor 3 - youth hostel, hostel director, registration clerk
4 management computers, 16 staff computers
have a large electrical room on 1st floor directly behind registration office
building 2
this is a temp building for 10 months
3 miles away
1 floor, 10,000 sq ft,square building
meeting rooms, reception area, coffee bar, daycare, offices
1 management comoputer 4 staff computers
Current hardware and software
20 machines Pentium 100s with 16MB memory, 1.2GB harddrives, windows 95 and office 97
5 machines 486DX 33s with 8MB memory, 500 MB hard drives, windows 3.1 and office 95. All 486s are used by management right now
Any suggestions?

6 replies

by stillatit

Start with the basic question of "What do we need?" Clearly you are functioning with no network at all (other than sneaker-net). You could certainly fully network all of the computers, but that would be a major buget-buster. A staged implementation is probably better for you. Your business needs should govern, not "wouldn't it be nice if...".

Start by deciding which computers really need to share data. Who moves data on floppy disks now, and how much and how often. Also, consider which machines should not be available to other machines at all (your payroll computer comes to mind).

It may be the case that you find that you actually need two or more networks which do not cross-connect (examples, youth hostel computers may share data, but not connect to fundraising, and fundraising computers talk to each other but not to the fitness center.)

(continued in comment below)

by stillatit

(continuation)

To network a group of computers, you need, as a minimum:

a) A network card for each computer (ethernet preferred). Costs range from $14 to over $100, with no real difference in functionality. The card for each machine MUST fit in an open slot on that machine (i.e., if all you have open is an ISA slot, you need an ISA card). The card for each machine must have drivers for the operating system on that machine. (Finding drivers for the Windows 3.1 systems may be a problem.)b) A hub of sufficient size for the group of computers. Costs range from $20 for a 4-port hub to hundreds for fancier larger hubs. Multiple hubs can be connected for larger groups.

c) CAT-5 wire connecting each machine to the hub, with RJ-45 plugs on each end. The wire in bulk is about $0.10 a foot, and the plugs in bulk are about $0.10 each, but you can pay much more for for pre-made cables. If you have a wiring company run the wires through walls, it will typically cost you $45 to $150 perwire run depending on your area and vendor.

d) On each machine you need to load the software drivers for the card you choose, and turn on TCP/IP, Microsoft Client, and File and Print sharing. You will need to assign an IP address.

Cross-connecting the groups requires a wire between the two hubs.

If you really need to connect the buildings, consider whether you need them connected all the time. Your phone company can link the buildings, but it may be very expensive. A dial-up modem connection may be sufficient.

Good luck.

by alin

The first thing to note here is that the operating budget is 2.2 million per year, which is not really small by many standards. There are companies with less than half that budget and still use technology, basic networking, and at least PII computers and reasonably priced server(s).

Though you may be presented with many technical solutions, it all boils to management philosophy about technology and how much can be spent in one-time setup and on periodic maintenance.

After working as an independent consultant on small networks (not more than 50 computers) for 14 years, I respectfully and sincerely like to ask a question: In this age of P4 processors and powerful Windows 2000 networking and other solutions, why management is still using 486DX 33s? Unless there is a strong business reason or hardship in not investing in current computers, the situation does not speak very highly about management's desire to change any thing (I apologize for any offense).

I think any money spent in networking 486 and Pentium 100 systems will be wasted. A lot of money will be wasted on service and labor with insignificant or NO advantage and may actually result in productivity loss and user frustration. Unless management outlines the priorities in this regard, a piece-meal solution may cause more harm than help.

Sorry for frank remarks, but they are sincere and are made respectfully to your company.

Ali Naqvi

This discussion is closed to new replies.