Discussion Locked

Setting up adapter teaming

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How would I set up what Intel refers to as adapter teaming on IBM Netfinity 4500's and Permanet servers which have AMD PCNet on board chipset nic as well as an AMD chipset Nic card. Bottom line is that both Nics will need to share an IP address forfault tolerance capabilities. Unfortunately IBM shipped servers with drivers and documentation for the Intel chipset, an Intel Nic card, and then informed us that adapter teaming was impossible with AMD paired with Intel. Thanks

5 replies

by sfo farmer

With Compaq's (using Intel based NIC's) you can set up teaming between a newer "smart" intel NIC and some of the Compaq integrated NICs.
Take a look at Intel's site on which (different models) can be teamed. If I'm setting up teaming on an older machine- I prefer to disable the integrated NIC (in the BIOS)and install two compaq/intel nic's.
It's not a cheap answer... but if you NEED the redundancy it's worth the maybe 500 bucks for both NIC. G' Luck! SFO

by bwalker

Thanks, unfortunately we have IBM Netfinities which have AMD Chipsets. I have found at this point drivers on IBM's site which claim to support fault tolerance for AMD's. We'll see.
Neb

by mckaytech

I don't know of a teaming option for AMD. As far as I know, it requires the Intel chipset.

It seems to me that if IBM represented that teaming was available on this server, THEY should be coughing up the NIC cards to make it happen.

paul

by bwalker

Thanks, I have found at this point drivers on IBM's site which claim to support fault tolerance for AMD's. We'll see.
Neb

This discussion is closed to new replies.