Discussion Locked

Setting up RAS in Win NT 4.0

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need someone to walk me through setting up RAS in WIN NT 4.0. From setting permissions to the actual connection from a remote machine. I seem to be getting lots of different messages i.e, 691 and assorted others. I know that I am really close to establishing a connection and need someone to put the finishing touches on this issue. Please help as I am tired of PC Anywhere.

Thanks

Mike

2 replies

by tprinzo

1. in user manager double click the user and make sure they have dial-in permissions.

2. control pannel, network, services, remote acess service, properties. Make sure the device(modem) is configured to answer calls, the configure button on the bottom of the screen. also the network button to the right of the window will let you set protocals and authentication.

3. reboot and try the connection.

I am assuming you have checked the dial up settings on the client.

hope that helps youout.

by fumitake

I am in agreement with, TPrinzo.
Just a couple of details I might add: Might help to think of RAS as an extension from Local Area Networking. Users need an account w/ permissions to logon + RAS access. To get it working start simple; No Call back, No Encrypted Password. Protocols: Client for MS Networking, File and Print Sharing(option), TCP/IP - allow callers to access the local area net, use hard coded IP addresses in Client an Server (for testing and trace + ping), On a small net 10pc's or less use tcp/ip and netBEUI. Also use the same user account on both Client and Server, this avoids confusion.
Note: These suggestions are for trial and testing purposes, in order for testing, trial and learn. Once the system is working and understood. Step, reverse the process and be sure to lock your system down for security sake.

Fumitake

This discussion is closed to new replies.