Discussion Locked

Setting up w2k as bdc in a nt4 network

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do i setup a windows2000 server, which is now only taking part in the nt-domain, as a backup domain controller for the nt4 pdc?

12 replies

by calves

Just go to Start, programs, administrative tools, configure your server, click on active directory, and click on domain controller. There are the instruction on how to make your W2K server a domain controller.

Good luck!

by timber

There is no such thing as a BDC for win 2000. Win 2000 only has Domain controllers. I would suggest making your PDC a w2k server and your existing w2k server a domain controller also. (Suggestions are hard to make on this question without knowinghow many servers and clients you have. Make sure you do proper testing and planning for this if your on a production environment!!!)

Good Luck

by tedbovis

as someone else has actually said you cant have a 2K server as a BDC `cause there are only DC's in 2000. THe microsoft recommendation for 2000 and NT4 servers is that you upgrade the PDC to 2000 but keep the server running in Mixed mode rather than Native thiis way the AD will appear as a flat SAM database and is still accesable by the NT4 BDC's. You sould also keep one of your BDC's in a secure location disconnected from the network when doing a migration to 2000 so that you can re-create the NT4 domain. There is no reason that once you have the 2000 DC acting as an NT4 PDC that you cannot then have other 2000 servers installed as other DC's providing backup/file & print and anything else.

by soren.albeck

Clarification - Win2K can act as a PDC, not as a BDC, in a mixed environment servicing downlevel clients. I'll second the suggestion to synchronize a BDC and take it offline before updating the PDC.

This discussion is closed to new replies.