Question Locked

setup cannot detect my HDD

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

dear sirs/madams

Im using acer extensa 5210. my problem is when i try to reformat my HDD the setup cannot detect my HDD . on the other hand CMOS has detect it. is there any possible way to install windows in my laptop? without the option for SATA?

2 replies

by rob miners

This is how you do it but you will have to find out the Motherboard specs for the Sata Driver. Check the Make and Model of your Notebook and do a Google search for the drivers or post the information here so that a peer may be able to help you track down the drivers.

Extract and Copy the SATA Drivers to a Floppy Disk. Boot from the XP CD and when prompted, press F6 to install the SATA drivers from the floppy disk. If you haven't a Floppy Drive Slipstream your XP installation with the SATA drivers.

How To: Slipstream your XP installation

Download nLite

http://home.midmaine.com/~nlite/nlite/nLite-1.4.8.installer.exe

http://www.nliteos.com/guide/

These are the steps that I took and if you have any problems read the guide.

Download the Sata Drivers from the manufactures web site.

Installed Nlite

Extracted Sata Drivers to a folder named Sata using WinRar. http://www.rarlab.com/download.htm

Copied the entire XP CD to a folder named XPS

Ran Nlite and Browsed to the XPS folder, Next, next then selected Drivers and Bootable ISO click next

At the Drivers Tab click insert, single driver and navigate to the folder with the inf for windows XP.

Highlight it and select open and select next. Select Textmode driver and select the XP Sata driver and click OK.

Click next and Yes to apply changes, next and select Make ISO. Burn it to CD using Nero or any other Software that will support the ISO Image.

How to burn an ISO Image:

http://www.ubcd4win.com/burn.htm

This discussion is closed to new replies.