Question Locked

Setup server 2003 with 1 NIC??

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having to setup a PDC on server 2003. I want to do this with only 1 NIC.

Our network is already handing out DHCP IP's. But I am wanting the new PDC to handle DNS and DHCP.

This is the current output from ipconfig /all from the server.
IP: 192.168.0.146
Subnet: 255.255.255.0
GW: 192.168.0.1
DHCP server: 204.228.228.147
DNS: 192.168.0.2

The adapter on the server is set to DHCP. This is the same output any computer on our network has except for the IP. But I'd like some workstations to be able to join the PDC & get it's IP's/DNS served from it (the PDC).

1. Do I leave the servers NIC at obtain an IP address automatically and Obtain DNS server address automatically?

2. When I am setting up the DHCP server on the new PDC and I'm making the new scope would I set a unique IP range like 192.168.30.10-254?
Do I make a new default gateway like 192.168.30.1? Do I make the parent domain XYZ.local?
Do I set the IP for DNS to something different than what the adapter is using? ie: 192.168.30.2?

3. Anything else I am missing? I basically think I have an issue with how the NIC is setup or with how I have the DNS & DHCP rolls setup.

Currently I can go to a workstation and change it to be a member of the domain and it asks for username & password. After entering the info it takes awhile to display this error.
"The following error occurred attempting to join the domain "testpdc":
The specified server cannot perform the requested operation."

Thanks!

17 replies

by ryan

Thanks for the reply. That's actually the guide I first followed when setting up the server. It didn't work...

by rob miners

CG IT is 100% right you should assign a static IP to the Server. Here are my settings to give you an idea. My default gateway is actually my modem.

Windows IP Configuration

Host Name . . . . . . . . . . . . : fs2003

Primary Dns Suffix . . . . . . . : minero.local

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : Yes

WINS Proxy Enabled. . . . . . . . : Yes

DNS Suffix Search List. . . . . . : minero.local

Ethernet adapter Server Local Area Connection:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Intel(R) PRO/1000 CT Network Connection

Physical Address. . . . . . . . . : 00-0D-61-64-5F-1D

DHCP Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 10.20.20.1

Subnet Mask . . . . . . . . . . . : 255.255.254.0

Default Gateway . . . . . . . . . : 10.20.21.254

DNS Servers . . . . . . . . . . . : 10.20.20.1

218.214.227.3

Primary WINS Server . . . . . . . : 10.20.20.1

by cg it

All your questions are basic Windows AD setup stuff. Microsoft has a best practice recommendations in all their training materials for certification and not assigning dynamic addressing to servers is one of them.

Suggest you go over to Microsoft's Technet site and start at the beginning. Maybe get some of their self paced training books from Microsoft Press.

link to MS Technet: http://technet.microsoft.com/en-us/default.aspx

link to MS Press : http://www.microsoft.com/learning/books/default.mspx

by kjell_andorsen

We do DHCP Reservations for many of our servers. This effectivly gives them static IPs, but if we need to update stuff like DNS or WINS Servers we can still do it through DHCP. The only servers we set truly static IPs on are Network infrastructure servers like DCs, DHCP and DNS servers.

by ryan

Thanks for the feedback everyone. I wonder though.. DUH!! Could this be because I don't have a CAL for the client workstation I am trying to connect to the new domain?

by rob miners

nothing to do with CAL's. You have 5 CAL's included with the OS. If you try to connect more than 5 PC's it will let you know. When I install the OS I stop at the first stage which is after the first CD. The first thing I do if I am using one Nic is set the IP address, Subnet Mask and Gateway for the server. Then I disable the screensaver and untick the on Resume require password. I then setup the other partitions as required and format them.
Then I will continue the setup. If you let the setup run and except the defaults it should setup the environment for you. Have a look at my server configuration and compare it to yours. It really can be quite complex. All I can suggest is that you find as much information as you can and try to take it in. If you start to feel frustrated or annoyed walk away and find something else to do. Just remember Rome wasn't built in a day.

by ryan

Thanks True Blue. I did setup the terminal licensing services yesterday but I don't know where to find the licensing type and keys... The box my server 2003 cd came in just has the product key for installing server 2003.

I think the issue is between how I have the network adapter configured and how I have DHCP and DNS configured.

We already have DHCP and DNS being served to the network. Do I want to configure the network adapter to the normal settings that are assigned to the adapter via DHCP but make it "static"?
I want any computer connecting to the DC to get it's DNS and DHCP from the DC so would I then use different IP's when I go through the wizards than the IP's the adapter is assigned?

THANKS!

by cg it

Sorry to be blunt but your either jerking our chains or you really don't know what your doing and therefore should stop working on a production network and learn before you do something that's irreversable.

The : "configure the network adapter to the normal settings that are assigned to the adapter via DHCP but make it "static"... is a dead giveaway.

The : " I want any computer connecting to the DC to get it's DNS and DHCP from the DC" is also a dead giveway that either your jerking our chains or have no clue.

by rob miners

agree with CG IT on this one. We can't make it any simpler with the instructions that we have supplied. If you can't see the big picture by now you have a long road ahead of you.

by ryan

Per http://www.microsoft.com/technet/prodtechnol/windowsserver2003/technologies/directory/activedirectory/stepbystep/domcntrl.mspx

14.

Click OK to acknowledge the warning of having a dynamically assigned IP address for a DNS server.

15.

If you have more than one network interface, select the 10.0.0.0 network interface from the Choose Connection drop-down list, and then click Properties.

16.

Under the This connection uses the following items section, click Internet Protocol (TCP/IP), and then click Properties.

17.

Select Use the following IP address, and then type 10.0.0.2 for the IP address. Press the Tab key twice, and then type 10.0.0.1 for the Default gateway. Type 127.0.0.1 for the Preferred DNS server, and then click OK. Click Close to continue.

This makes it so the adapter can't connect to the internet. This is what I am asking about. Should I leave these settings as is (to the IP's that would be assigned via DHCP) or if I use these settings how do I get the server online with only one NIC & working as a DC?

I am lost. I guess I am talking in circles and not making sense. Basically I am not sure what to enter for the DHCP scope & what IP's to set my adapter to.

This is the settings the adapter gets via DHCP

Physical Address. : XX-XX-XX-XX-XX-XX
Dhcp Enabled. : Yes
Autoconfiguration Enabled : Yes
IP Address. : 192.168.0.146
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
DHCP Server : 204.XXX.228.XXX
DNS Servers : 192.168.0.2

This is before I make any changes to the server (a fresh install with DHCP).
So what static settings do I use on the adapter and what settings do I enter for the DHCP scope?

Thanks guys!! Again!

by rob miners

If I was you I would start from scratch as it looks like you are in a test environment anyway. You can pre set the Partitions without formatting them. I normally create 3 Partitions. One for the OS C:, One for Users and ClientApps D:, and a small one for tools that may be required. EG: I normally run my add/remove user scripts from here. As this is a test environment I would create two Partitions. One large and one small. That way everything will be installed onto C: drive.

When I install the OS I stop at the first stage which is after the first CD. I then cancel the second stage of the install. The first thing I do is set the Static IP address, In your setup it will look like this.

Static IP address 192.168.0.2
Subnet Mask 255.255.255.0,
Gateway 192.168.0.1
Primary DNS 192.168.0.2
Secondary DNS 218.214.227.3
which is my ISP's DNS you will have to substitute yours.

Having entered this information allows the wizards to configure DHCP, DNS and Active Directory.

Then I disable the screensaver and untick the on Resume require password. I then setup the other partitions as required and format them. I then plug a flylead from the Server into a hub or switch makeing sure that there are no other leads connected other than the Server.
Then I will continue the setup. Follow the prompts. If you let the setup run and except the defaults it should setup the environment for you.

SolarWinds have an excellent Advanced Subnet Calculator that is free. Download it and have a play. I found it to be a good learning tool.

http://www.solarwinds.com/products/freetools/

If you get into anymore trouble PM me.

by cg it

and begin reading em from the beginning.

I recommend the self paced training materials for Windows 2003 MCSE.

That way, when confronted with an issue like this, you'll have to basics.

by ryan

I'll give this a try in a bit. I am in a test environment so no one is effected by it. And I actually am on the path to becoming MCSE certified. I have a few books, starting from the beginning! But my boss suggested I start setting up AD now... to get some practice in.

Thanks again guys!

by rob miners

Good to see that you are up and running. All the best with your future career in the IT Industry.
Rob

This discussion is closed to new replies.