SFT III Architecture
Can u please let me know how the SFT III Works in Novell Netware 4.12. What is IO Engine & MS Engine and what are their functions ?
2. What would be possible problem for mirror breaks.
Networks
Can u please let me know how the SFT III Works in Novell Netware 4.12. What is IO Engine & MS Engine and what are their functions ?
2. What would be possible problem for mirror breaks.
by miller6010
SFT III is a complete server mirror. Each server is a complete system with chassis/CPU/Memory and disk drives. Both servers should be identical hardware.Netware is installed on 1 machine then the sft III install walks you through the process of setting up the second machine. The servers must be connected together using an sftIII NIC card using a crossover cable. After sft III is installed you will have 3 server console screens to alt/esc through. server_io1:/server_io2: and server: The IO's will be the 2 physical servers and the third will be the Mirrored Server(MS) this is a virtual server. If one of the IO engines has a problem, i.e. abends, the other active server will keep the clients connected and working.
Just keep in mind that I don't believe Novell is supporting SFTIII on Netware 5.
Hope this helps.
Mike
by nkamurlekar
by miller6010
SFT III is a complete server mirror. Each server is a complete system with chassis/CPU/Memory and disk drives. Both servers should be identical hardware.Netware is installed on 1 machine then the sft III install walks you through the process of setting up the second machine. The servers must be connected together using an sftIII NIC card using a crossover cable. After sft III is installed you will have 3 server console screens to alt/esc through. server_io1:/server_io2: and server: The IO's will be the 2 physical servers and the third will be the Mirrored Server(MS) this is a virtual server. If one of the IO engines has a problem, i.e. abends, the other active server will keep the clients connected and working.
Just keep in mind that I don't believe Novell is supporting SFTIII on Netware 5.
Hope this helps.
Mike
by nkamurlekar
by miller6010
SFT III is a complete server mirror. Each server is a complete system with chassis/CPU/Memory and disk drives. Both servers should be identical hardware.Netware is installed on 1 machine then the sft III install walks you through the process of setting up the second machine. The servers must be connected together using an sftIII NIC card using a crossover cable. After sft III is installed you will have 3 server console screens to alt/esc through. server_io1:/server_io2: and server: The IO's will be the 2 physical servers and the third will be the Mirrored Server(MS) this is a virtual server. If one of the IO engines has a problem, i.e. abends, the other active server will keep the clients connected and working.
Just keep in mind that I don't believe Novell is supporting SFTIII on Netware 5.
Hope this helps.
Mike
by nkamurlekar
by nkamurlekar
This discussion is closed to new replies.
Sort by Trending