12 replies
by andres28 Accepted solution
by bart777 Accepted solution
Have those network users remove the printer and the driver for that printer.
Then reattach the printer on those network machines. You should be fine after that.
by andres28 Accepted solution
by bart777 Accepted solution
by ferdia Accepted solution
by joe Accepted solution
by webcup Accepted solution
by leon.matthasen Accepted solution
by tim Accepted solution
by Former member Accepted solution
http://www.lbmsys.com/axiardeliverprinter.html?gclid=COLjioT5oJMCFQ4Yuwodsn2Org
http://www.brooksnet.com/google-adwords-printmanagement?103bees=cpx&gclid=CO_sh5T5oJMCFQUJuwodDAYhtg
http://www.czsolution.com/
Please post back if you have any more problems or questions.
by soodeh_fazli Accepted solution
I had the same problem.
i solved it with make my firewall off.
note:firewall on printer owner's pc
by cambroneroronie Accepted solution
I have read some articles and forums from another site maybe similar to this issue and my conclusion is:
You may try powering on your printer 3minutes later than your computers.
You may try disabling or Uncheck the Enable Bidirectional on the Ports Tab of Printer Properties, BUT ..
..may have the RISK to stops any computer from getting communication from the printer. Like pop-up messages such as jams, toner levels, etc. are lost. More importantly, such user interactions as manual feeds prompts for printing sheet-fed checks, envelopes, labels, or alternative stock paper are blocked once bidirectional communication is disabled.
So, if you are willing to take those risk and need to solve your current issue. We'll its up to you to try.
By the way, for your security, you may want to create a restore point before making any changes on your computer.
You may have knew how it is done. If not, here are the steps.
Press the Windows key once and type restore point. That would search for what you have typed.
Then you should see a highlighted link named with Create a restore point.
So click in it, so you would be redirected to the system properties, look for a Create Tab and press on it.
Type what you want to name on it so you could know it was the restore point that you'd created.
Now press the Create tab to proceed.
This could helped you restore back your previous settings on your computer, when things getting worst by your exploration and huge try outs on fixing problems.
In restoring back your settings, just press the Windows Key again, but this time you have to type a word SYSTEM RESTORE.
Follow and agree the wizard until you reach the restore point which you have to choose for restoration and get back your previous settings.
Hope this could help you buddy.
This discussion is closed to new replies.
Trending Peripheral posts
Sort by Trending