Discussion Locked

Shareing files, printers, and DSL

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I Have a 2 node network. I am able to share the internet via a 4 port linksys router. I am running WIN ME on both PC's. DO I need a hub to share the files and printer? If so how do I connect a hub to the router so I will be able to share the internet.

Or can I install another NIC card on both machines and connect them via a cross over cable to share the files and printer?

6 replies

by "jb"

I am not real fimilar with ME but my understanding is that it is very similar to 95. If so you shouldn't need a hub. Check to see if you have File and Print sharing activated on your nodes. Then ensure they are shared. Good Luck

Joel

by "jb"

Sorry, I wasn't real clear on my answer. Ensure that the Printer and files are shared.

by dkroshan2002

What you have mentioned as linksys router is not a router but a DSL modem with a built in 4 port hub (presuming you have a DSL connection). In that case make sure both the computers are in the same subnet and enable "File and Print Sharing" through Control Panel Network. Hope this will help.

by perillic

i have a dsl connection and a dsl modem plugged into the 4 port router. What you are suggesting is that I eliminate the DSL modem and plug the dsl line directly into the router. That does not work. What works is that I bought a 5 port hub andpluged my 2 nodes into the hub and ulinked the hub to the router. Know I have a 2 node network that can share two printers and the DSL connection.

No software needed. I don not need win me and I do not need the DSL software its all in the router for the DSL and the Hub takes care of the file and print sharing.

Works well.

This discussion is closed to new replies.