11 replies
You need to install some form of NAT on this Server. MS Proxy Server 2.0 is the Microsoft answer. Your other choice would be to activate NAT on the router directly. This may need a new router.
If you use non-routable IPs on a Multi-Homed server with out installing some type of NATing, either your Router will reject it.
by rkubacka
by mckaytech
You need to have some method for routing the packets from your LAN to the DSL modem. MS Proxy Server would do the job but it's relatively expensive and creates it own set of problems.
My suggestion would be one of the many DSL routers available now (LinkSys, D-Link). The cost is only a little over $100. Installation consists of plugging in the power, plugging your DSL modem in on one side and a network hub on the other and setting it up.
paul
by rkubacka
by ayoshida
All posts for this question are correct and great. There are several ways to accomodate what you are trying to accomplish. A router could be a very expensive solution, MS Proxy requires proxy clients on the machines you want accessing the internet, NAT (Network Address Translation) which Win2000 Advanced Server supports is also a good answer. However, the one thing you did not put in your question is how you are getting your IP addresses. Is your ISP providing you with a static address(es) or DHCP?
Personnally, my DSL provider issued me w/4 static addresses and I'm using Win2000 Adv Server NAT for all of my machines. However, I've installed DSL at customer sites where US West (opps, QWEST) is providing them w/DHCP address. In whichcase a hub is all we needed between the DSL modem and the other machines (be careful to use a rolled cable when connecting two like network devices).
Good luck and have fun learning about TCP/IP when doing so.
by rkubacka
by spiceman
If you have windows 98 second edition or Windows 2000 and connect the DSL modem to that machine.
Then you need to install the share internet connection option from add remove programs for the operating system in control panel.
You need to makethis machine part of the NT domain or workgroup.
good luck
by rkubacka
by mbarta
by rkubacka
by rkubacka
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending