Discussion Locked

Sharing broadband (and files)

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have two Compaq PCs. PC 1 runs XP-pro SP1, and PC 2 runs XP-pro SP2. These two are peer-to-peer networked through a cable, essentially for sharing files. Internet access was (and still possible) through dial-up access from either PC, but on standalone mode.

I have now got a broadband connection through an ADSL modem, which is hooked to PC2 on USB. The modem has an ethernet port (not used yet).

PC1's dial-up connections (several) are all enabled with internet connection firewall, but the peer-to-peer LAN is not firewalled.
PC2's dial-up connections (also several, for fallback when broadband is down) are all enabled with windows firewall, additionally the peer-to-peer LAN is firewalled on this machine.
The ADSL modem has a built-in firewall.

I would like PC1 to access the broadband connection too. How to set it please, such that my file-sharing network is not disturbed? I have very basic understanding of networks, so would appreciate simple directions.
Right now my PC2 system tray shows two LANs - the peer-to-peer and broadband. PC1 system tray has only one LAN - the peer-to-peer.

Thanks,

2 replies

by abanerji

Thanks for your prompt response. Apart from the hardware solution, is it possible to use software to share broadband?

For example, what if I activate ICS on the host? Would that work, or would that interfere with my second LAN (peer-to-peer)? Also, if it works, what should the settings be in both PCs?

The step-by-step guide link is wonderful, but essentially advises about starting from scratch. I already have two LANs running ... so, how to just tweak the existing settings?

Finally, I found a freeware "Analog-X Proxy" (http://www.analogx.com/contents/download/network/proxy.htm). Can this help, and especially under XP?

Thanks again.

This discussion is closed to new replies.