Discussion Locked

Sharing Internet w/one cable modem

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm trying to share Internet access with two PCs and one cable modem. The two PCs are connected to an ethernet hub and the cable modem is connected to the same hub on the uplink port. When the first PC boots, I can get a dhcp address and access the internet without problems. However, when the second PC boots, it times out trying to get a dhcp address, gets the default address from Win2k (169.X.X.X) and cannot access the inet. The management software for the cable modem only shows the one PCconnected. I have heard that I should be able to share the modem with several computers using the configuration I've built with the LAN. The hub seems to be working fine as I can ping the PCs locally. I don't think there is a configuration changeon the cable modem (at least that's what the vendor said). Does anyone know what may be the problem?

9 replies

by bmvernil

If you received your cable modem from the cable company it may be that it is designed to only give one dchp address. Either try assigning the pc with a static address that is in the same range as the dchp address and see if that works or go and purchase a third party cable modem which usually has a nice hub or sometimes even better a switch built into the modem. Good luck.

by mckaytech

I*n order to do what you're trying to do, you'll have to lease an additional IP address from your cable ISP. When you do, they will give you a machine name that will permit you to obtain that new IP address by DHCP.

The other options are to use one of your PCs for Internet Connection Sharing (either with Win2k Prof, Win98SE or a third-party product like Sygate), or to obtain a hardware router (e.g. D-Link or Linksys) to share the one IP address you have now. For the software solutions, you'll need to add a second NIC to the computer that shares the connection (one NIC to the cable modem and one to the hub).

I don't know what rates are in your neck of the woods, but here in Arizona with Cox@Home, the monthly rate for an additional IP address is about $7 per month on top of the basic rate for Internet access.

By way of comparison, a hardware DSL/cable router can be found for close to $100 or for about $15 you can throw an extra NIC in your W2K Professional or Windows98SE machine.

paul

by mike o

The simplest and possibly cheapest solution is to talk to them about the additional IP address and if you will need different software/more equipment.

It's my understanding, though, that not all cable companies will allow you to host multiple machines (I know of at least one in the Chicago area).

What you can do in this case is buy the additional network card as discussed above. One NIC card goes to the cable modem, one goes to the hub to connect both machines.

Then buy yourself something like WinRoute from Tiny Software (www.tinysoftware.com). It's easy to configure and acts as a proxy server and does some firewalling. It also does Network Address Translation so the cable company will only ever see the one IP address/computer.You simply use non-routable IP's on the 2nd/internal NIC and the other computer (ie, 10.0.0.1+).

by ankit0

If you r using windows then go for win-proxy software available free on the net and if you have the unix machine or even windows then you dont need a hub just put the another networking card in the pc to which you will fix with cable modem and the other card will be attached to the other pc in the form of peer network and then u will see it will work fine

This discussion is closed to new replies.