Discussion Locked

sharing WinXP resources to Win98 clients

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Have any of you experienced a problem sharing a printer or a folder from and XP workstation to a WIN98 workstation?

I am having trouble sharing resources on WinXP PRO clients. I successfully joined the client PC to the Domain. The correct domain name is listed under identification. File and printer sharing for Microsoft Networks is installed. The printer is designated as a shared resource for "Domain Users". I can share out the printer just fine to WinXP clients. When I try to install a new network printer on a WIN98 workstation I can browse to the required resource ID, but when I click to expand it, I get an error, ? \\share-name is not accessible. This device does not exist on the network.? (and yet it does). I have the same problem with sharing XP Client hard drive folders.

The error only exsists on WIN98 PCs attempting to use WINXP client resources on a Domain. (peer to peer networks between and XP client and a Win98 client work fine).

15 replies

by tduval

For shared directories, take care of a commun bug under W98 : long (>15 chars) are not recognized.

Shorten the share name, and everything will go fine

by sgt_shultz

huh. have you created accounts for 98 machines on the xp machines with username and password identical to the username and password used to 'logon' to the domain. and make sure the accounts created on the XP machine are local, not domain accounts...i have this working on my domain but took some fiddling. is bosses off-site computer so i can't go to it and give you exact steps, sorry

by allen risler

Yes, I have created local accounts on the XP machines with the exact same username and passwords. All clients log on to the Domain. WinXP clients can use Win98 resources. Win98 clients can not use WinXP resources, ie printers and folders.

by tqp050774vp

How do you logon to Win98 pc? Make sure you logon to home domain to access network resources. You can access network resource this way: Start-Run- \\server name - OK. Then doubleclick the shared resources (folder and printer) and it should open or load to your Win98pc. Good luck

by allen risler

All clients log on to Client for MS Networks and are authenticated by the Domain Server, one segment. There are a variety of ways in which you should be able to map a network drive or install a network printer, unfortuneatley none of them work, not by browsing or by specifying the correct sharename.

by sgt_shultz

well, not sure. but if i were there i would check:
1) make sure account exists for win98 machine on DOMAIN CONTROLLER (you said win98 box successfully joined domain?)
2) make sure account exists locally on XP boxes, not domain accounts on the XP box...
3) double-check permissions for win98 box on share (win98 box will not be 'authenticated user' so if that's what you have set, that is your problem. try setting to full control for 'everybody' to test.
4) i am assuming the win98 box can see other computers in network neighborhood, just not access their shares? (eliminating plain old wiriing/nic problems?)

by allen risler

1. Yes I did so the account does exist.
2. Local accounts do exist on XP box.
3. Permission on XP box are set to allow Everyone and Domain Users, and the specific username. Win98 user was given Admin privledge temporarily for testing and it stillfailed.
4. Win98 users can see everyone in network neighborhood including the XP box which it supsequently states does not exist.
No NIC problems, The XP box can access the Win98 PC and share a Win98 folder or Win98 printer, but the Win98 box can not access the WinXP box (on a Domain).

by frank.lin

How is the status if other Win2K or WinXP PC connect to this WinXP client?
Check the firewall setting of your WinXP PC.

by allen risler

How is the status if other Win2K or WinXP PC connect to this WinXP client?

How is the status of what? All clients connect to the Domain Server via Client for Microsoft Networks. The status of all of the clients is just fine except for Win98 clients do not have access to WinXP resources.

The firewall setting on the XP Client is disabled.

by clubmac

You could try removing the hardware in question and then when the sytem finds it again, set the proper permissions at that time. It's a stretch but might work.

by allen risler

It sounds like you are suggesting to remove the NIC? Then reinstall the NIC? The network card is workinging.

by Member 27896095

Allan ,

I can't seem to find the answer to this query on the site - could you please post the solution as I have the same problem!
thanks
Michael Smart

by allen risler

There is no answer to this query onsite because I tried all of the suggestions and still had the problem. I tried to ask Microsoft and did not get an answer. One day, the problem just magically went away. I tried to show the problem to a colleage, and it would not duplicate.

This discussion is closed to new replies.