2 replies
by jordana
What kind of tape drives are they? DLT, 4mm?
In my experience, you usually upgrade due to the backup size well before the drives fail. You can look for hardware failures during backups, write failures, read failures. Ensure you verify backups andthey are good. You might want to consider new tapes if the ones you are using are older, or have been written to a fair amount (this is dependant on drive type).
Jordan
by chrisms
It is highly unlikely the drives will fail unless there is a lot of dirt in the system. As for the constant cleaning of the drives, think of these drives as being similar to the tape in your car stereo, If you need to clean it, find out why. You say every few days, this sounds like one of the tapes might be dirty, in which case it needs replacing. Keep a record of which tapes you use before the drive wants cleaning and see if a pattern emerges. Also check the enviroment your drives are in, is the room clean, are the covers over the drive front, can dirt get in the drive any how. House keeping around these things is very important.
Happy cleaning. :-)
This discussion is closed to new replies.
Trending IT Employment posts
Sort by Trending