13 replies
by dmiles
If this pertains to Win98,and not Win98SE,it may be a video card problem that drivers need to be up dated.
Use the Microsoft Knowledgebase for a reference to get more info.
by makumbamumba
by archer174
by makumbamumba
by joeuser
I am going to assume you are running Win98 SE, just because there is a known bug with SE and shutting down. The bug can be fixed by applying the patch released by MS for it. The other thing is, if you just give it a minute after you shutdown and turn off the power, you'll be fine. No scandisk when you turn the system on again.
If you are NOT using Win98SE *4.10.2222* and you have this problem it also could be a third party anti virus problem, those fixes are vendor specific.
by makumbamumba
by frank.duffey
Your LOGOS.SYS file may be corrupted Extract the file from the Win98 CD or from a second PC. The file is located in C:\windows Dir.
Replace the file then reboot your system.
by makumbamumba
by pcross
After reading the last four answers, all those things are possible. But, I have found that is a true win98 bug and the patch will not always fix. So after some research of my own, I have found that it is a cache memory dump problem on shutdown, so to fix go to the
system properties,performance tab,advanced setting,file system properties,set read ahead optimization on the hard drive and cd-rom down to as small as possible. That will shut down 99% of the time, otherwise just turn-off after a minute.
by makumbamumba
by blhk
by makumbamumba
by makumbamumba
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending