Site to Site Between Sonicwall VPN and W2k3 Server
Hi folks do any of you know if it's possible to create a site to site VPN between a Windows 2003 or 2008 Server and a Sonicwall (Pro2040) device? TIA!!
Networks
Hi folks do any of you know if it's possible to create a site to site VPN between a Windows 2003 or 2008 Server and a Sonicwall (Pro2040) device? TIA!!
by cbaur88 Accepted solution
by cg it Accepted solution
by cbaur88 Accepted solution
by cg it Accepted solution
these two routers are the perimeter routers on the 2 networks and you establish a persistant tunnel between the 2 routers. this tunnel can be VPN or if the routers can support it IPSec.
then any users [hosts] behind the routers can access the tunnel and use it.
If you choose to use W2003 servers at the end points, then you simply have a tunnel between the 2 servers which the servers alone can use. My question would be, what's the point?
You can get consumer level DSL or cable modem routers that support site to site VPN tunnels. Their not to expensive. Linksys has the BEFSX41 router that supports site to site endpoints. The real problem lays with bandwidth. If you have a bunch of users accessing the tunnel you can have network congestion that will substantially slow down both traffic in the tunnel and traffic through the router. While 4 and 8 mbps throughput isn't so bad, even 54 mbps throughput, heavy internet usage or data transfer through the tunnel will tax the processing capabilities of the router.
This discussion is closed to new replies.
Sort by Trending