Question Locked

Site to Site VPN netgear FVS114 ProSafe VPN Firewall

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi ,

I am trying to setup site to site VPN using two FVS114 netgear VPN firewall

site A

billion modem (suspect this might be blocking it) ---netgear FVS114 VPN ---server etc

Site B

Netgear dsl modem --netgear FVS114 VPN --- pc

I ran the VPN vizard and status saying Phase 1 waiting PHASE 2 Idle.

site B logs shows

site B logs

[2008-12-02 23:15:20][==== IKE PHASE 1(from x.x.x.x) START (responder) ====]
[2008-12-02 23:15:20]**** RECEIVED FIRST MESSAGE OF AGGR MODE ****
[2008-12-02 23:15:20] PAYLOADS: SA,PROP,TRANS,KE,NONCE,ID
[2008-12-02 23:15:20] PAYLOADS: SA,PROP,TRANS,KE,NONCE,ID,HASH
[2008-12-02 23:15:20]**** SENT OUT SECOND MESSAGE OF AGGR MODE ****
[2008-12-02 23:15:37][==== IKE PHASE 1(from x.x.x.x) START (responder) ====]

Note; I have replace the ip with X.X.X.X

Site A logs shows

[2000-01-01 00:28:28]**** SENT OUT FIRST MESSAGE OF AGGR MODE ****
[2000-01-01 00:28:28] PAYLOADS: SA,PROP,TRANS,KE,NONCE,ID
[2000-01-01 00:28:48]**** SENT OUT INFORMATIONAL EXCHANGE MESSAGE(DELETE_PAYLOAD) ****
[2000-01-01 00:28:51][==== IKE PHASE 1(to x.x.x.x) START (initiator) ====]
[2000-01-01 00:28:51]**** SENT OUT FIRST MESSAGE OF AGGR MODE ****
[2000-01-01 00:28:51] PAYLOADS: SA,PROP,TRANS,KE,NONCE,ID
[2000-01-01 00:29:11]**** SENT OUT INFORMATIONAL EXCHANGE MESSAGE(DELETE_PAYLOAD

Have i missed any ports?
what's wrong?

4 replies

by jaym71

For one thing, on a VPN router to router connection, you shouldn't be using aggressive mode. They should be in main mode. Depending on the situation, direction can be both or one as responder and the other as initiator.

by badrulislam

can u check client to getway and remote client
under vpn wizard.

i think this will be the issue
create two policy for each.

hope it will be ok

This discussion is closed to new replies.