Discussion Locked

slow fibre optic network

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi there,
we just moved into a new building wired with fibre optic cable. it should run at least on 100 Mbits but when i copy a 5 mb file from one server to the next it takes 8 minutes!!! Even my isdn at home is much faster. I changed the cable andthe ports - same result. Anyone came across this problem before and can tell me were i should look to? Any settings in the NIC I have to change?
thank you
kay

5 replies

by greybeard770

I would check the duplex settings. Fibre doesn't autonegotiate, not that that's really a problem in itself. But if the fiber is running full duplex and connected to a hub running half duplex (which is all a hub can do) then you have real performance problems.

by andrew.mizzi

how slow is it actually running (as in figures). I doubt it, but just check that it isn't a problem between your two servers. Try to isolate the problem as much as you can.

Techrepublic ran an article about preventing network packet collisionsrecently, it may be worth checking that out if you have any clone servers possibly.

This discussion is closed to new replies.