Discussion Locked

slow laptop

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I use a 2.8GHz Pentium IV, 60Gb, 512mb Toshiba laptop. The problem is it is slow in multitasking, it is slow to open programs and switching is slow. I have try simple basic troubleshooting; defragmentation, scandisk... are they commands that can fix this problem. I even set the "paging". But it didnt work...comon guys what is wrong with my laptop.?

3 replies

by hal 9000

Most likely problem is the RAM installed being the wrong type for best performance. To save money quite a lot of these companies will only install 1 stick of RAM so the CPU is only being feed at half speed.

Another stick of identical RAM may improve the position as it should allow the CPU to be feed data at its native 800 MHZ FSB. Whenever I do this I always replace both RAM sticks with the same brand/model so I know that I'm not introducing any possible timing issues by using different speed RAM.

As for resizing the Page File you need to have enough Disc Space and instead of just increasing the set size which should be at least 1.5 to 2 times the actual size of the Physical RAM present for the lower size and bigger for the upper limit you also have the click on the SET box for the changes to take effect.

Of course constantly running DEFRAG will help keep the system running as fast as possible.

Col

by jbuzz

Please provide more details about your issue.

Is your laptop factory configured? Or have you modified it with new components already? Hard-drive? PCMCIA cards? Typically, pre-built machines are screaming fast off the assembly line because they have been tested and configured for optimum performance. Once we put them in the real world and start installing software or hardware in them, it is a whole new game.

What applications are you experiencing slow performace with? "Slow" compared to what? Did this laptop at one point work better than it does now?

Some graphics and memory intensive apps need massive RAM and memory throughput for best performance. Some (like Photoshop) really need separate physical hard drives for paging.

by gary56789

Adding more memory of the correct type may well solve your situation.

However, you should try and remember how fast the PC ran when new and multitasking with your current software. If it used to run faster, checking (in Safe Mode) for malware and cleaning out unneeded Registry entries should help.

An overheating CPU, bad memory chip or failing hard drive can slow down the works. Also, disabling apps in msconfig--Startup tab, as well as disabling unneeded processes and services may help.

As a last resort, an OS reinstall may be necessary.

This discussion is closed to new replies.