Discussion Locked

Slow VPN connection from W98 clients...

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an NT server that uses PPTP to listen for incoming requests for a VPN connection from W98 clients who connect through a dialup internet connection. The server is connected using a broadband link. On the W98 end, file transfers seem slow andjust the other day while looking through event viewer, I saw that is was logging the connection and saying that they only connect at 9600. How do I increase this connect rate? Is there a setting someplace? The W98 client connect to the internet in the 50000 range. The server provides http and ftp at broadband rates so upload speed is not limited...help!

9 replies

by strong002

There is not enough detail to give a great answer, but I would check to make sure that your bandwidth throttling is setup corrently.

by johnny51

I guess I'm not actually having a problem per the answers and Technet info below...Thanks though!

by calves

If you have all the updates and SPs from Microsoft in place, your server is functioning properly otherwise, the problem is not on your end. The ISP provider for your client, may be limiting the bandwith for the VPN channel.
Another possibility is that your clients are using their bandwith for other online goodies such us multiple browsers constantly refreshing, ICQ, Buddie, POP3 email, etc...
Remenber, just because the connection speed says 52 K does not mean a constant speed, it varies on a connection.

Do a test yourself:
Win98 - single protocol (TCPIP) preferably.
Nothing else open, good dialup connection and start your VPN...
Let me know and good luck!

by johnny51

Ssllooww connections happen exclusive of any other internet app. Server runs nicely with all the appropriate SPs etc. We have tested the connection with the data travelleing through pipe being only the VPN connection...on both ends. I guess it's time for W200 and it's active directory to assist in general network browsing...Thanks for you help!

by shmaltz

Nothing is wrong with the configuration. The fact that event viewer reports 9600 means nothing; please look up:
http://support.microsoft.com/support/kb/articles/Q263/6/14.ASP?LN=EN-US&SD=gn&FR=0&qry=vpn%209600&rnk=3&src=DHCS_MSPSS_gn_SRCH&SPR=MSALL
remove spaces
its KB article Q263614
The fact that it is slow is because they are connected thru a slow connection, a dial up connection.
As the price of cable/DSL is so low I whould suggest to swicht those users who trasfer a large amount of data to a cable/DSL line.

by r bailey

There is nothing wrong with the server - it will always display a 9600 bps connection speed. This was done by design. (TechNet article Q263614)

I have, however, seen users connect to our VPN server through a DSL or cable modem connection, and the server does indeed display a connection speed of 100,000 bps.

If the users' connections are extremely slow, it's probably a problem on their end or with their ISP. DSL/cable subscribers have never complained to us about slow connection speeds!

by johnny51

Thanks for your help but somebody beat you to the points by 16 minutes...argggh! The broadband on the clinet end does help but a bit impractical to have this luxury when your in a hotel and need your last word file. Can't wait until dialing upgoes the way of the TRS-80. Thanks for your help!

This discussion is closed to new replies.