Discussion Locked

Small network install

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have finally been giving the opportunity to install/administer a small network at my current site. It looks like that all my complaining about being a MCSE with no hands on might change. However, I am very concerned that my lack of hands on might hinder my excitement. I will be working with 12 nodes that I would like to set up in a client server environment. The purpose of the network is to provide a training lab for the company. My initial thought is to expose the employees to 2000 professional and server, while continuing to utilize the NT 4.0 and 95 platform. Any thoughts of a preliminary network design or topology? My emphasis is to make this project simplistic but yet effective. Any help would be appreciated?

1 reply

by manskopf

To answer your topology question: I would probably go with a 10/100 Base-T Ethernet topology. It should give you plenty of bandwidth for your small network and it's pretty much the standard these days, it seems, although it really depends on your situation. You may even wish to go with a 10/100 Base-T Switching Hub, instead of just a regular hub. This will potentially give you extra throughput, especially if you ever get more than one server, for a fraction more of the price.
If all the computers are in the same room, then this works great. If the computers are in different rooms, then running the cable can be a hassle, especially through or inside the walls or ceiling (I've done it in my house). You'll need Plenum cable (instead of regular PVC) if you're running it inside the walls or ceiling. If you're going this route, I'd hire someone to do the wiring.
You could go wireless, which would eliminate the wiring problem, but you'll only get up to 11Mbits/sec, and it's expensive forthe hardware.
There's also USB, if you're close together in one room, which is less expensive than wireless, but you'll still get all the wires, and only get up to 12Mbits/sec.

If I understand the other part to your question correctly, unfortunately I don't have enough Win2K experience to be able to help you there, I'm finishing up on the NT4 track myself.

This discussion is closed to new replies.