Discussion Locked

SMB Server 5.0 Licenses exhausted

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I keep getting Event Viewer messages about SMB Server 5.0 running out of licenses on a WIN2K Server. The entire network consists of this WIN2K Server and 2 WIN2k Pro WS and the Server has 5 (per server) CALs installed. There seems to be almost no info available about SMB or SMB Server. What might cause this?

7 replies

by orpheus

Did you upgrade from a Windows NT 4.0 server? If you did, then the CALs need to be re-installed. I discovered this on Exchange server after upgrading a box to 2k server, all the license info had expired. Re-installing them took care of this. Hope this helps!

by michael

I am having this same problem, I have even gone as far as setting the licenses to the max that can be put in. (999999)I have followed some of the step listed in Microsofts KB with similar problems (changing registry entries) I have reinstalled win2k(twice). There is no date at Microsoft relating to this exact error... Can anybody throw me a bone???

Thanks

by jolly roger

I finally changed to Licenses from 5 to 10 and the problem went away. I have still not determined why a LAN consisting of a server and 2 Windows 2000 professional nodes cause this error message.

by techwhizz

SMB stands for Server Message Block. Basically it is the Protocol that Windows Machines use to establish a connection.
To Check Registry:
1. Run Regedt32.exe.

2. Go to the following key:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LicenseInfo\FilePrint

3. Double-click ConcurrentLimit:REG_DWORD:0xn (where n is the hex value
currently set).

4. Click the Decimal check box in Radix, change the data value to match the
number of licenses actually installed on the server, and then click OK.

5. Close the registry.

If you still get the error, then check you haven't got a NFR or Direct Access Version.

If you need a quick workaround, then just logon as administrator.

Regards,

Laurence.

by jolly roger

I checked this setting and it is correct (5). I also do not have an NFR or Direct Access version.

This discussion is closed to new replies.