Discussion Locked

So your flying to a site

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have to go to a site on the other side of Canada, Yes dare I say it Eastern Canada hehehe.

Thing have been really stable in my Microsoft environment; believe it or not I haven't been there in about a year. There saying there not feeling the love, and miss me,

Some back ground info. One File server, about 12 computers, Office 2k3, T1 network, pure Cisco infrastructure and most of the PC are Dell. No wireless.

1. I plan on doing an office 2k7 upgrade for them clean up there switch and server area. Kinda dusty.
2. Round up all the electronic and get them ready for recycling. (yes we recycle everything in Canada well at least I do hehehe).
3. Set up a PC for the guys in the back.
4. Go through all the PC?s and clean up none standard software.
5. upgrade all the ram for the PC?s because Office 2k7 is a pig (looks good but a ram Pig)

QUESTION

What other things do you do work wise when you head to a site.

4 replies

by jamesrl

Your is a possesive - Your car is the car you own. You're going to fly.

There is a place. They're missing you.

I would make sure that they all are getting all the MS patches and anti-virus updates automatically.

I would be defragging their HDs if I had the time. I would also scan for spyware if they don't have the software installed.

If you are installing RAM and you have the computer open already, blow the dust out of the fans.

Verify their backup processes are in place and working.

James

by william.bondy

Thanks for the grammer update LOL!!

I use a corp version of anti virus so I know what computers are not getting updates.

I get a copy of the backup logs everyday.

Blowing out the dust, I can add that to the list. Not a bad idea at all!

by jamesrl

But those examples stood out.

Wondering why they fly you across the country when they could hire someone local for X$ an hour who could do this on your instructions. It isn't like we have a shortage of techs in eastern Canada.

If you opening up the case, good to get the dust out even for the sake of putting the new RAM in - if you put RAM in a dusty slot you may get problems.

So why not go all the way and clean the fans too. I've seen too many video cards, power supplies and CPUs die because they overheat after the fan gets clogged. It was worse when people were allowed to smoke in the office.

James

by nicknielsen

Take a vacuum!!

In my experience, Dells are wonderful for coating the processor heat sink in a nice warm dust blanket. I have to open and clean all my Dells at least semi-annually. Blowing the dust out will only raise a cloud and irritate your allergies.

Take a vacuum and hold it about an inch (or 2-3 cm if you've gone completely metric) above the components on the main board and the processor. Get as close as you can without actually touching anything. Remove the processor fan and [b]thoroughly[/b] vacuum the heat sink. Processor utilities have reported core temperature drops of up to 15? C after the heat sink is cleaned.

This discussion is closed to new replies.