Question Locked

Soulseek port setup forwarding

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Please advise me on setting the correct port to connect to Soulseek network for TP-Link Archer VR300 modem router. After changing provider the original default setting stopped working, see sshots. According to the available procedures, I don't dare to dig into the setup myself. Can I ask for advice on how to fix the problem and set up the correct communication port?
thx for any advice
Peter

https://pasteboard.co/aWeZuKlUIxKj.jpg
https://pasteboard.co/tybZEy5kSzSJ.jpg

4 replies

by rproffitt

As I read https://en.wikipedia.org/wiki/Soulseek and other tutorials, there was no need to port forward and there are forums which I did not seek out for support.

If you are port forwarding my bet is something is blocking your access. Again, from what I read there is no need to port forward.

by sophiesophiealice701

Open Soulseek and choose General Options from the Options menu. A field titled "Listening Port:" should appear. By default, Slsk (short for Soulseek) chooses a random port for you to use. A button with the text "Test firewall and router setup" appears next to this field

by Willjoe24

If your VPN allows you to do so, open both the Soulseek listening port and the obfuscated listening port (just below it) in your VPN client. Disconnect from the VPN, open your Settings, click the Network tab, and check the box next to "Request Port Forwarding."

Regards,
Will

This discussion is closed to new replies.