Discussion Locked

starting problem in windows'98 SE

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

when i on my computer,it didn't open windows automatically.It will ask me for 5 questions, regarding logging on with safe mode,log mode.
(when we press F8 on booting of computer will open when start up my computer.)
so what to do?
my sys is WINDOWS'98 SE

11 replies

by vertex

Choose safe mode. Let the system boot-up and re-start the system. You should be able to boot normally the second round. However if you still end-up on 5 questions screen, choose step by step. This will take you the trouble that your PC is having.

by nicholas paras

For it to bring you to this screen (5 choices) it means that your windows is not loading correctly. Think to when this started. Did you install any particular software? If so enter safe mode, uninstall any suspiscious software and reboot. You shouldbe OK now. You are lucky, some people end up in an endless loop rebooting constantly.

Hope this small tip helps,

Regards,

Nicholas.

by jdfcomputer

when the memu appears choose command prompt

type this in in dos mode

cd\ (hit enter)
attrib msdos.sys -r -h -s (hit enter)
edit msdos.sys (hit enter)

The editor should appear with the msdos.sys file contents.

under options add

BootMenu=0 (this will turn off the menu)

press alt-f
choose save and then exit
turn off computer and turn it back on

you will never see that menu again.

by kcmeister

Nicholas Paras probably has it right. The other possibility is that the "show start menu" option has been selected in msconfig. To check this, click start>run>type in msconfig. In the systems configuration window click on the advanced tab. Uncheck the box that says show menu on start-up(or something like that)>click apply>click ok and pc will reboot.

Good luck!

by abi9999

If Windows always starts by showing the "Start-Up" Menu

Change the "msdos.sys" BootSafe Entry from '1' to '0'

1) open explorer, go to the root folder, find the file msdos.sys,
2) right click on the msdos.sys file name and select Properties from the pop-up menu
3) Click the Read Only attribute so it is blank (unchecked), click OK to close the properties window
4) Open the file 'msdos.sys' using Notepad
You can also use Explorer to launch notepad by finding the file msdos.sys and rightclicking on the file name, and selecting Open. If Open is not an option then select Open With and select Notepad.
5) When msdos.sys is open you will see a listing like the one below...

[Paths]
WinDir=c:\windows
WinBootDir=c:\windows
HostWinBootDrv=c
[Options]
BootWIN=1
BootSafe=0
BootMulti=0
BootGUI=1
DoubleBuffer=1

Look at the entry BootSafe= , if it says 1 then you've found the problem, change it to read BootSafe=0.

Note: If the BootSafe entry is not found, we suggest you to write the entry as: "BootSafe=0" without quotations.

Select "File Save" from the top menu and close Notepad
6) Again in Explorer, find the file 'msdos.sys' and as above, right click and select properties. In the properties window click the "Read Only' property so it is checked, and click OK.

This discussion is closed to new replies.