"Ntkrnlmp.exe Could Not Be Loaded. The Error Code Is 7" Error Message Occurs During Windows Setup
Article ID : 318729
Last Review : January 8, 2004
Revision : 1.0
This article was previously published under Q318729
SYMPTOMS
During the text-mode portion of Windows Setup, Setup may stop responding (hang) and you may receive one of the following error messages:
The file I386\Ntkrnlmp.exe could not be loaded. The error code is 7.
-or-
The file I386\L_intl.nlf could not be loaded. The error code is 7.
As a result, you cannot install Windows.
CAUSE
This behavior can occur if either one of the following conditions is true: ? There are incorrect settings in the computer's basic input/output system (BIOS) configuration.
-or-
? One or more of the random access memory (RAM) modules that is installed on the computer is faulty.
RESOLUTION
To troubleshoot and resolve this behavior, use the method that is appropriate to your situation.
Method 1: Restore the Default BIOS Settings
WARNING: This procedure may involve changing the computer's complementary metal oxide semiconductor (CMOS) settings and altering the computer's BIOS. Incorrect changes to the BIOS of your computer can result in serious problems. Change the computer's CMOS settings at your own risk.
To resolve this behavior, restore the computer's BIOS to its default settings. For information about the correct BIOS settings for the computer and about how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.