7 replies
At the voltages used in Cat 5 cable, solid cable is actually better. But...why would anyone use stranded? Stranded cable is actually designed to be used for situations in which the cable will be run vertically through conduits, etc. Because most devices will have plugs on the horizontal, this causes a bend from the vertical to the horizontal, placing stresses on the cat 5 cable (as a whole). Stranded cable tends to flex a little and be more resistant to problems that would cause data loss with constant flexing of the cable.
On the flip side, solid core was designed for conduits running horizontal because of the lack of the same problem.
Practically speaking, solid core cable (aka "plenum cable") is usually used for permanent terminations behind wall spaces, wall plates, etc. where the cable is not expected to move. Stranded is usually used for patch cables that may or may not be regularly moved.
Hope that helps,
by thegoldy
by mckaytech
The previous answer was interesting and his rationale was new to me. I tend to think of the solid-versus-stranded more in terms of termination types and resistance to fatigue failures from repeated flexing.
I choose a solid cable whenever the wire will be terminated on a punchdown connection and when the cable itself will be secured to a rigid infrastructure or, at least, will not be moved about once installed.
I choose a stranded cable for patch cables and other applications in which afair amount of movement can be expected and the termination is a crimp-on RJ45 plug.
Electrically, the two are equivalent when terminated properly so it really comes down to the mechanical characteristics as the important difference between the two.
paul
by thegoldy
by sdraney
by thegoldy
by thegoldy
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending