4 replies
by ajis
Hai,
It may be the Problem of Hard Disk. Plz scan the HDD for bad sector.
by hal 9000
Turn off remove the battery and make sure that it's unplugged from the Mains Adaptor for several Minutes.
If this doesn't cure your problem you defiantly have a [b]Hardware Problem[/b] as the computer isn't even POSTing so you'll need to start at the beginning by removing the HDD and backing up all your data to another computer. You can use a USB Caddy for this as it's cheaper and far less dangerous than using the 2.5 to 3.5 inch Drive Adaptor if you put the adaptor on the wrong way you'll blow your IDE Controller Chip.
Then pull all the RAM and try booting again if you don't get any error beeps the unit is dead so if it's UG return it ASAP and if it isn't you can either start looking for a new NB or take it in for repair but knowing just how expensive NB M'Boards are the new NB would be your better option.
Col
by skidoggeruk
re-set button anywhere?
What model is it?
by doctordan
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending