Discussion Locked

Subnet 2 locations via Bridging or ?

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a class c network divided into 4 equal subnets. One of the subnets is assigned to a remote location (15 miles away). Would like to include the remote into the local network and allow the remote clients IP assigning via DHCP as well as access to our local services i.e. CD server.

Was informed that bridging would work but was extremely slow and cumberson, even with our T-1 connect between the 2 site.

Looking for possible ideas, including establishing remote as separate domian with trust between the two. Am currently IPX routing but this dosen't allow for browsing of our local network to the CD server and resources.

8 replies

by jaystar

I would install a BDC at the remote site, running WINS and DHCP. Install and run WINS at the local site, and have the WINS servers update eachother. (If you have a T1 I would recommend push and pull partners.) This will allow you to have one domain, and be able to see the computers from each side of the T1. Set the WINS server, default GW, etc. in the DHCP servers. Any other questions on exact configs, feel free to drop me a line.

by cavedweller

There is a good example of how to do this in the Microsoft NT4 server resource kit documentation. I wouldn't use a bridge to connect the two locations, I would use a switch. This would keep local traffic from tying up your T-1. Establishing a remote BDC also restricts T-1 traffic and provides for those times when the link is down. Replication heavily utilized content to the remote server can also help reduce traffic.

by sfo farmer

You could do DHCP requests over the WAN if IPHelper aka DHCP helper is loaded on your routers to forward DHCP requests. I would put a BDC at the site running WINS/DNS and DHCP to reduce the bandwith on the WAN.
If you want to increase the speed of the WAN link and reduce IPX traffic between sites there are a few alternatives- Cisco has a IPX compression solution and Novell can setup two Netware 5 (using the v 5 ipx-ip migration solution)servers to tunnel the traffic going ipx->ip-->ipx.
Adding the WINS server local should solve most of the browsing issues... g'luck! SFO

by sfo farmer

I forgot one other thing- If you use switches you may be able to use a vlan trunking protocol over the WAN (if you have compatible equipment like Cisco Catalysts)

This discussion is closed to new replies.